We recently track prepped this beautiful Silver Porsche 997 GT3 RS with BBS E88 belonging to Eli Kogan from OTTO Car Club, a unique social club and storage facility for car collectors and enthusiasts in Arizona. To provide proper restraint and support, we installed our our BBi Autosport StreetCup Roll Bar powder coated in Satin Black, Schroth GT3 Harnesses, and a Recaro Profi SPG racing seat mounted on our BBi Seat Base & Slider Kit. We finished it off by dialing in the suspension with our corner balance and alignment setup.
The BBi Street Cup Porsche 996 & 997 Street Cup Harness Bar features a 2 piece design and high strength seamless tubing (1.5” x .120” main hoop & 1.5” x 0.95” rear hoops) for excellent strength to weight ratio. With our sensible approach, the 2 piece design allows the bar to be mounted to the front seat belt mounts and to the rear strut towers (stronger mounting points), and still be compatible with the factory Bose subwoofer. Other similar roll bars on the market are not compatible with the subwoofer. For superior strength and rigidity, the bar utilizes “X” braces on both front and rear sections and each joint has been meticulously TIG welded by hand. Bolt-in installation is accomplished by using Inner Diameter Tube Clamps that are CNC turned and milled for a precise fit. These unique joints allow us to eliminate the more traditional slip fit tubes with an unsightly through-bolt and nut.
Made from high strength seamless tubing (DOM) (1.5” x .120” main hoop & 1.5” x 0.95” rear hoops) for excellent strength to weight ratio
TIG welded and utilizes “X” braces on both front and rear sections for superior strength and rigidity
Mounts to front seatbelt mounts and rear strut towers
Utilizes laser cut mounting plates & inner diameter tube clamps that are CNC turned and milled for a precise and seamless fit
Designed to work with stock or any aftermarket seats on the market
Can be used with stock seatbelts or 6 point harnesses for track use
Designed to work with wrap-around style harnesses while optional eyelet bolt provisions are available for clip-in harnesses
OEM fit & finish. The main hoop contours entire arch of the roof with an even 3/16 inch gap
Finished in satin black powder coat. Other optional colors available
Designed to fit all 996 & 997 non-cabriolet models including the Carrera, Turbo, GT2, and GT3
Bolt-in installation requires no drilling and minimal carpet trimming
Compatible with factory Bose subwoofer
Made in USA
International shipping is available and wholesale inquiries are welcomed. BBi Autosport products are also available worldwide through our growing dealer network in North America, Latin America, Europe, Middle East, Africa, Asia and Pacific. BBi Autosport is always actively working to expand our dealer network worldwide to grow the distribution of our products and better serve our growing client base.
Please note that roll bars have a turn around time of one week.
Shipping Instructions: Please select the "Roll Bar Only - LTL Freight" option. (If outside the contiguous USA 48 states, please contact us for special shipping arrangements)
The RECARO Profi (FiA) racing seat provides the best starting position for racers seeking to compete for podium places. The Profi's ergonomic S shaped shell forms to the back and the he "built-in" lumbar support provides structured support for the lower back that protects against spinal compression in high impact accidents. Combined with high quality foam the seat is outstandingly comfortable. The bolsters and deep seat cushion pocket cradle your body. The seat holds you firmly in place preventing the fatigue and discomfort caused by unwanted movement during aggressive driving maneuvers. Available in 2 sizes, the Profi SPG XL is 35mm Wider than the normal Profi SPG.
RECARO Profi SPG
FIA Certified and Crash Tested
RECARO Proprietary Ergonomics
RECARO High Integrity Comfort Shell - Fiberglass
Larger Height and Width - Fiberglass Shell
Aggressive Thigh & Torso Bolstering
RECARO Friction Grip at Shoulders
Screw Mounted Panels at Belt Slots
Flame Retardant Upholstery
Long Lasting High Quality Cover
High Quality Durable Foam
Suitable for 4,5, or 6 Point Harness
NOTE: Rails and seat brackets are not included. For Porsche seat mounting solutions - get the [BBi Seat Base and Slider Kit]
Part Number/ Size / Price
070.91.UU11 Profi SPG Standard
070.86.UU11 Profi SPG XL Black Velour
Shipping: Please opt for the “LTL Freight” Shipping option for USA. For International shipments - please contact us.
$250 Single Seat
$400 Pair of Seats
The BBi Autosport race spec seat mounts are a direct bolt into the factory mount location for a hassle free, easy installation for your competition race seat. The BBi Autosport Seat mounts have a large range of adjustment options allowing fitment for all major FIA and SFI approved seat brands and offers an integrated 5 and 6 point sub belt mounting location. The wide range of adjustment covers almost all possible seating preferences to properly seat drivers of all sizes. CAD designed, CNC laser cut and formed from one piece of .125” (1/8”) carbon steel with no welds to maximize strength and stiffness. All mounts are powder coated with a wrinkle black base and satin black sides.
Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel (base & side mounts)
Multi way adjustability
High strength sliders, mounts to base with 4 bolts per slider
Integrated 5 and 6-point sub belt mounting locations
Stylish design with laser cut BBi logo and durable satin black Powdercoat finish
No modifications to vehicle or any seat mount components are required for installation
Uniquely designed for Porsche vehicles for the best possible fitment
Mounts to factory bolt locations with precise factory fitment
Fits all major FIA/SFI approved seats up to 17”
14-3/4”¬(375mm) to 17-1/2”(445mm) width adjustments (standard side mounts)
16”¬(407mm) to 18-3/4”(476mm) width adjustments (optional wide side mounts)
Please verify seat sizing to ensure compatibility and fitment. Call us if you have questions or seek advise on best seat options for Porsche vehicles.
Click "Additional Info" for Installation Photos