performance

BBi Society, Performance, Race

Season Opener : RaceBBi at Willow Springs 01.27.19

Race_BBi_Full.png

Towards the end of 2018 BBi partnered with SpeedDistrict and jump started the RaceBBi track days. High performance driving events (HPDE) are meant to provide an outlet for enthusiasts to push the limit of their vehicles on local tracks. We wanted to expand the experience and tailor it to our customers by providing track side support, instruction and hospitality. This enables us to educate our customers on their latest upgrades, build confidence in their vehicles and setups and do so within a safe environment with our technicians and tools on hand.

We started off 2019 with the first RaceBBi track day at Willow Springs Raceway near Rosamond, CA. The main track, Big Willow, is 2.5 miles long with nine turns and significant elevation change. Willow Springs is also the oldest permanent racetrack in the United States, opening in November of 1953. It is now a Historical Point of Interest in California. Fastest time at this track is 1 minute and 6.05 seconds as set by Michael Andretti in a CART Indycar. Please don’t try to beat that… yet.

Some cars were delivered in time for the event. We had just completed another milestone for the BBi 4.0l 997 GT3: full E85 compatibility. That means a new in-tank fuel system update, injectors and flex fuel sensor. The Syvecs ECU handles all the tuning changes with the flex fuel sensor. Our calibrator was collecting data logs as the car ran the sessions. Nothing beats real-world data. This is a real example of how much can be done when we have full control over the engine, being able to adjust the smallest details to enhance performance and drivability.

The 991.2 GT3RS has barely over 100 miles on the clock and was finished for this event as well. BBi StreetCup spring package updates the spring rates and our Corner Balance and Alignment set it up for the track. Wheels were swapped to the Manthey BBS WEC spec Magnesium wheels, wrapped in the new Michelin Pilot Sport Cup 2 R Tires resulting in massive grip and weight loss. BBi 3D printed inconel long tube headers with side muffler deletes uncorked the already impressive engine (and reduced weight) To top it all off we loaded a BBi ECU calibration to take advantage of the flow and get a bit more power out of higher octane fuel. The car is quite impressive out of the box, but there is more to be had and we will keep dialing it in.

The Ultima GTR always turns heads (and ears) and it was back out for some more testing and validation. Its an impressive machine as its built like a race car with a massive engine and now a sequential transmission. MoTeC keeps the powerplant going and the traction control logic works great to keep the car steady. We collected data logs to ensure all is within spec.

Driver instruction is a big part of this experience and understanding of vehicle dynamics. We will walk you through the best line around the track, talk about brake and acceleration zones. We also talk about proper reactions to ensure your safety on the specific track and in regards to other drivers. Thoughout the day our team works with the drivers, getting feedback on the vehicles and feel and recommending shock settings, advising on tire wear and track conditions. Each car is also continuously inspected for debris, damage or other hazards or issues.

Working with our customers and seeing our builds being thrashed around the track is also massively beneficial for us in how we develop product, ECU calibrations and chassis setups. We collect telemetry and logs from the cars after sessions, we gather driver and instructor feedback and complete post track day inspections. The wealth of data and notes gathered helps us review design requirements and adjust products and services as needed.

At the end of the day we get to see our work perform and our customers enjoying their cars. We develop these parts and work with our clients create their bespoke machines for this exact purpose. There are more events in 2019 (Check out the Calendar) and we look forward to working with more of you! The Buttonwillow RaceBBi event (02.08.19) is up and registration is open (Link)

Thank you SpeedDistrict for hosting, Jason of Shift-S3ctor for spearheading this, the instructors for their patience and wisdom and our crew for their relentless support and energy. We also are grateful for our Partners who help us support their products or share their resources to build these machines.

Here are some more photos from this day.

 

Performance, Race

BBi Test & Tune: 997 Turbo Porsche and Ultima GTR

BBi Autosport test and tune at Auto Club Speed way, hosted by Speed District. We brought out the Porsche 997 turbo and the Ultima GTR for some shakedown runs.

The Porsche 997 Turbo has been overhauled with Porsche Cup car Carbon doors, roof along with decklid and wing. New #aerodynamics updates on the front end. Chassis has a 991-like Cup car roll cage and suspension has been updated with GT3 front uprights, while still retaining the AWD system along with Ohlins TTX dampers. This through build has a myriad of other upgrades and we will make a profile of this car soon. Its quite the #machine in its native environment.

The Ultima GTR has been upgraded with a Albins sequential transmission, full new wiring and sensor package with Motec as the electronics platform. The vehicle now has traction control, instant shifts and is simply from a different world when it comes to track performance.